Big Frame Stator Varnish Automatic Immersion Machine Dipping Depth Above 300mm WIND-ZCJ
Application:
Stator varnish machine composed of machine body, water cooler and varnish supply tank. It is mainly
applied to stator winding insulation treatment for fractional horsepower motor and industrial Y series motor
which is below frame size 132.
Dipping time depends on varnish density.
Water pump dipping time usually is 2 minutes , and few minutes per cycle.
1. Water-based and solvent-based varnishing by cold dipping method.
2. Including dipping, holding, curving and ventilation steps.
3. Collection of dripping lacquers in the post-immersion stage and recirculation to the tank, including the
flue system required for in-kiln emission collection and discharge.
4. Including basket and delivery vehicle structures in suitable structure to feed the stator to process.
5. Oven tube resistance, sufficient number of circulation fans.
6. Includes oven safety covers.
7. Stator varnish machine have an integrated process control system with operator panel which is
userfriendly user-interface software program that can follow up and control such as program loading,
temperature monitoring, alarm setting, PID & Limit temperature setting, PLC program and computer
module to follow process parameters.
We produce stator varnish machine in electricity power,diesel power or gas, It has two types mechanism
in the varnish area:
1. Varnish tank goes up and down which is driven by the screw rod
2. Varnish tank fixed and the chain goes down and up
Situation 1 is suitable for stator with dipping time requirement, suppose the varnish dippin time is 2
minutes and pitch time is 5 minutes, stator don't need to stay inside the varnish tank for 5 minutes
In situation 2, the varnish tank don't move and don't need transmission, no drive needed.
Product Tags:
|
|
Big Frame Stator Varnish Trickle Impregnation Machine Dipping Depth Above 300mm Images
|
